E-14
(2) Insert the stylus pen into the holder at the right
side of the main body.
Note:
The attachment hole at rear of the control panel
can be used to attach the stylus pen with a string.
Attachment hole
Holder
(3) Attach the supplied duct cover. (Two supplied
screws B)
Tab
12. Connecting the power cord
Note:
Steps (1) and (2) may be unnecessary depending
on the applicable marketing area.
(1) Connect the connector of the power cord to the
main body.
WARNING
Use the appropriate power cord.
Failure to do this could result in a fire or
electrical shock.
(2) Fit the supplied cable clamp (small) over the
power cord. (One supplied screw C)
(3) Plug the power cord into the power outlet.
