E-10
(3) Open the right door and remove the protective
sheet and the locking materials.
Note:
• After removing the locking materials, make
sure that the transfer roller assembly is se-
cured in place. In the case of <NG>, press the
transfer roller assembly into place so that it is
secured as shown in <OK>.
• Save the packaging materials removed in this
and subsequent steps for later use when
transporting the machine.
<OK>
<NG>
(4) Close the right door.
(5) Slide out the tray 1.
(6) Remove the protective tape from the tray 1.
Note:
See the User’s Guide for instructions on setting
paper in each tray and configuring the paper
types.
(7) Slide out the tray 2 and remove the tray locking
materials.
(8) Remove the protective tapes from the inside of
the tray 2 and remove accessory parts.
(9) Slide out the tray 3 and remove the protective
tape and protective material.
(10) Remove the desiccant and the locking screw
from the tray 3.
