Konica Minolta Bizhub-C31P, Service Manual, Page: 241 / 370

14. Malfunction code Field Service V er. 1.0 Apr. 200 8
204
bizhub C31P
T
roubleshooting
0510 FUSER
ERROR
Abnormally low heating
roller temperature • The temperature detected by the thermistor/1
remains lower than the specified value for a given
period of time or longer.
0511 FUSER
ERROR
Abnormally low fusing
pressure roller
temperature • The temperature detected by the thermistor/2
remains lower than the specified value for a given
period of time or longer.
0520 FUSER
ERROR
Abnormally high heat-
ing roller temperature • The temperature detected by the thermistor/1
remains higher than the specified value for a given
period of time or longer.
• The heater lamp remains ON for a given period of
time or longer.
0521 FUSER
ERROR
Abnormally high fusing
pressure roller
temperature • The temperature detected by the thermistor/2
remains higher than the specified value for a given
period of time or longer.
0B30 FINISHER
ERROR
Finisher aligning plate
drive malfunction See P.29 of the staple finisher service manual.
0B47 FINISHER
ERROR
Finisher media holding
drive malfunction
0B4 8 FINISHER
ERROR
Finisher exit roller pres-
sure/retraction mal-
function
0B4A FINISHER
ERROR
Finisher aligning belt
pressure/retraction
malfunction
0B4C FINISHER
ERROR
Finisher media ejector
motor malfunction
0BA0 FINISHER
ERROR
Finisher tray up/down
motor ascent/descent
drive malfunction
0BE1 FINISHER
ERROR
Finisher fan motor mal-
function
0F52 TE
SENSOR Y
Toner level sensor/Y
malfunction • An error occurs on the toner level sensor board
(TLSB).
0F53 TE
SENSOR M
Toner level sensor/M
malfunction
0F54 TE
SENSOR C
Toner level sensor/C
malfunction
0F55 TE
SENSOR K
Toner level sensor/K
malfunction
133B FINISHER
COMMUNI-
CATION
Finisher
communication error
• A communication error occurs between the main
body and the finisher.
13C0 ENGINE
H/W
ERROR
Print control board mal-
function
• A communication error occurs in print control board
(PRCB).
13E2 FLASH
WRITE Flash ROM write error • Flash ROM writing is found faulty during a check.
LCD1
(service
call ID)
LCD2/LCD3
(error
description)
Item Detection timing