manualshive.com logo in svg

Konica Minolta Bizhub-C31P, Service Manual, Page: 179 / 370

Share
Download
Konica Minolta Bizhub-C31P Service Manual Download Page 179

9. Menu

Field Service 

V

er. 1.0 Apr. 200

8

142

bizhub C31P

Adjustment / Setting

9.6

MEMORY DIRECT

• This menu appears only when the optional hard disk kit and/or the compact flash is 

installed.

• This menu does not appear when “DISABLE” is selected in the [INTERFACE MENU] 

→

 

[MEMORY DIRECT] setting.

9.6.1

LIST OF FILES

9.6.2

TYPE OF FILES

9.7

CAMERA DIRECT

9.7.1

PAPER SOURCE

Function

• Displays folders and files stored in a USB memory connected to the USB port and 

sends print jobs.

Use

• To select files to be printed with the USB memory direct print function.
• The maximum of 99 files and folders in total can be displayed.
• The maximum of 7 folder hierarchies can be displayed.

Setting
/procedure

1.

Insert a USB memory into the USB port.

2.

Select [MEMORY DIRECT] 

→

 [LIST OF FILES] and select files to be printed then 

press the menu/select key.
(When a desired file is in a folder, select the folder that includes the file and press the 
Menu/select key.)

3.

Specify a media type, duplex printing ON/OFF, the number of copies, and other nec-
essary settings.

4.

Select [PRINT] and press the menu/select key.

NOTE
• Do not remove the USB memory from the main body during memory direct 

printing.

Function

• Specifies the types of files to be displayed on [LIST OF FILES].

Use

• To limit the types of files that can be listed.

Setting
/procedure

• The default setting is PDF, XPS.

PDF, XPS, JPEG, TIFF

“PDF, XPS”

Function

• Sets the tray using for camera direct photo printing.

Use

• To change the tray using for camera direct photo printing.

Setting
/procedure

• The default setting is TRAY 2.

TRAY1”

“TRAY2”

TRAY3

TRAY4

NOTE
• Only the mounted tray can be selected.

Summary of Contents for Bizhub-C31P



















































































































































































































































































































































































Reviews:

No comments