Konica Minolta Bizhub-C31P, Service Manual, Page: 167 / 370

9. Menu Field Service V er. 1.0 Apr. 200 8
130
bizhub C31P
Adjustment / Setting
9.4.3 COPIES
9.4.4 COLLATE
9.4.5 FINISHING
Function • Sets the number of prints.
Use • To specify the number of copies of the job to be printed.
Setting
/procedure 1. Select [COPIES] and press the Menu/Select key.
2. Select desired print number with the up key
S
/down key
T
and press the Menu/
Select key.
• The default setting is “1” copy.
“1” copy to 9999 copies.
NOTE
• The setting in the printer driver overrides the setting in this menu.
Function • Sets printing in sets.
Use
• To print several sets of multiple pages.
ON : Print in sets.
OFF : Print in page.
Setting
/procedure • The default setting is OFF.
ON “OFF”
NOTE
• This menu is available only when an optional hard disk kit is installed.
• The setting in the printer driver overrides the setting in this menu.
Function • Selects an exit tray and finishing option at the staple finisher.
Use
• To select an exit tray and finishing option when a optional staple finisher is installed.
SUB TRAY : Printing to the sub tray
MAIN TRAY : Printing to the main tray
OFFSET : The media is fed to the main tray with each copy slightly shifted.
STAPLING : Each copy is stapled and fed to the main tray.
(When the collate function is selected, each set of copy is stapled.)
Setting
/procedure • The default setting is MAIN TRAY.
SUB TRAY “MAIN TRAY” OFFSET STAPLING
NOTE
• This menu is available only when a staple finisher option is installed.
• The setting in the printer driver overrides the setting in this menu.
• OFFSET and STAPLING functions are available only for the following media
types and media sizes.
Media type: Plain/Recycled/Letterhead paper
Paper size: 182 to 216 mm in width and 257 to 356 mm in length
• 2 to 30 sheets of paper can be stapled at a time.