Konica Minolta Bizhub-C31P, Service Manual, Page: 107 / 370

6. Other Field Service V er. 1.0 Apr. 200 8
70
bizhub C31P
Maintenance
8. While pushing the positioning protru-
sion [1] of the drawing up transporta-
tion assy against the housing, fix the
assy with one screw [2].
NOTE
• Check that the two drive gears [3] of
the drawing up transportation assy
are engaged.
• Use a 0.1 mm piece of a thickness
gauge to check the gap between the
positioning protrusion [1] and the
main body frame. Make sure that
the piece of the thickness gauge
cannot pass through the gap.
(A transparency can replace the
thickness gauge.)
• Check that the shield sheet which
confirmed in step 4, is well
grounded onto PH unit base plate at
malt of drawing up transportation
assy.
9. To reinstall, reverse the order of removal.
[2]
[3]
[1]
< 0.1mm
A011F2C057DA