Konica Minolta Bizhub-C31P, Service Manual, Page: 225 / 370

11. SER V ICE MENU Field Service V er. 1.0 Apr. 200 8
188
bizhub C31P
Adjustment / Setting
Conversion method from hexadecimal number to binary number
1. The hexadecimal number (four digits) is converted in each digit based on the following
table.
2. Match the converted numerical value of four digits, then two head digits are excluded
and it is assumed the binary number of 14 digits.
(2) EVENT LOG
(3) CONFIGURATION PG
Hexadeci-
mal number
Binary
number
Hexadeci-
mal number
Binary
number
Hexadeci-
mal number
Binary
number
Hexadeci-
mal number
Binary
number
0 0000 4 0100 8 1000 C 1100
1 0001 5 0101 9 1001 D 1101
2 0010 6 0110 A 1010 E 1110
3 0011 7 0111 B 1011 F 1111
Functions • To print the E V ENT LOG.
Use • To check the jams/troubles which occurred, and the history of replacing the consum-
ables.
The items which can be checked are as follows.
Paper Jam Error : The number of times jam have occurred and its history
Engine Fatal Error : The history of the troubles which required service call
Fuser Unit
: The history of replacing the fuser unit
Transfer Belt : The history of replacing the transfer belt
Second Trans : The history of replacing the transfer roller
Toner Cartridge : The history of replacing the toner cartridge
Imaging Unit : The history of replacing the imaging unit
Trouble Counter : Trouble counting for each section
Setting/
Procedure 1. Select [E V ENT LOG] and press the Menu/Select key.
2. Select [PRINT] and press the Menu/Select key.
Functions • Prints the information concerning the Configuration.
Use • To check the adjustment values set by the Maintenance Menu and Service Menu.
The items which can be checked are as follows.
TOP ADJUSTMENT
LEFT ADJUSTMENT
LEFT ADJ DUPLEX
TRANSFER POWER
IMG ADJ THICK
IMG ADJ BLACK
IMAGE ADJ PARAM
MAXIMUM DENSITY
FUSER CONTROL
Setting/
Procedure 1. Select [CONFIGURATION PG] and press the Menu/Select key.
2. Select [PRINT] and press the Menu/Select key.