Konica Minolta Bizhub-C31P, Service Manual, Page: 161 / 370

9. Menu Field Service V er. 1.0 Apr. 200 8
124
bizhub C31P
Adjustment / Setting
F. How to read consumable/periodic replacement parts (units) counter information.
• The lower left part of the statistics page shows numerical values that represent consum-
able/periodic replacement parts (units) counter information.
The table below explains counter information that is provided by each numerical data.
<Display on the statistics page>
<Meaning of counter value> (From the left of the numerical values)
0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0 8 C07
No. Contents
1 Number of times a high-capacity toner cartridge (K) has been replaced
2 Not used.
3 Number of times a toner cartridge (K) made by companies other than KMBT has been replaced
4 Number of times a high-capacity toner cartridge (C) has been replaced
5 Not used.
6 Number of times a toner cartridge (C) made by companies other than KMBT has been replaced
7 Number of times a high-capacity toner cartridge (M) has been replaced
8 Not used.
9 Number of times a toner cartridge (M) made by companies other than KMBT has been replaced
10 Number of times a high-capacity toner cartridge (Y) has been replaced
11 Not used.
12 Number of times a toner cartridge (Y) made by companies other than KMBT has been replaced.
13 Use of counterfeit toner cartridge (K) is set at “1.” (The default value is 0.)
14 Use of counterfeit toner cartridge (C) is set at “1.” (The default value is 0.)
15 Use of counterfeit toner cartridge (M) is set at “1.” (The default value is 0.)
16 Use of counterfeit toner cartridge (Y) is set at “1.” (The default value is 0.)
17 Use of toner refill cartridge (K) is set at “1.” (The default value is 0.)
1 8 Use of toner refill cartridge (C) is set at “1.” (The default value is 0.)
19 Use of toner refill cartridge (M) is set at “1.” (The default value is 0.)
20 Use of toner refill cartridge (Y) is set at “1.” (The default value is 0.)
21 Rate of transfer roller use (%)
22 Number of times a transfer roller has been replaced
23 Rate of transfer belt unit use (%)
24 Number of times a transfer belt unit has been replaced
25 Rate of fuser unit use (%)
26 Number of times a fuser unit has been replaced
27 Number of times a imaging unit (K) has been replaced
2 8 Number of times a imaging unit (C) has been replaced
29 Number of times a imaging unit (M) has been replaced
30 Number of times a imaging unit (Y) has been replaced