Konica Minolta Bizhub-C31P, Service Manual, Page: 135 / 370

8 . Description of the control panel Field Service V er. 1.0 Apr. 200 8
98
bizhub C31P
Adjustment / Setting
C. Firmware update
• The control panel displays the following description at firmware update.
D. Warning
• This message is displayed when the print is available but some user manipulation(s) are
required. The control panel displays the following description for warning.
Display Description
LCD 1 FIRMWARE UPDATE is displayed.
LCD 2
LCD 2 displays the type of firmware (for example, SYSTEM).
• SYSTEM: Controller firmware
• BOOT: Boot firmware
• RESOURCE: Resource file
• CONFIGURATION: Equipment configuration file
• ENGINE: Engine firmware
LCD 3 Progress of the update is displayed (for example, 90%).
LCD 4 No display
A0EAF3E503DA
FIRMWARE UPDATE
YMCK
SYSTEM
90%
Firmware update
Type of firmware
Progress
Display Description
LCD 1 Print mode is displayed and warning icon is displayed on the right (for example, READY).
LCD 2
Warning message is displayed (for example, TONER LOW M).
LCD 3
LCD 4
Key guidance is displayed (for example,
T
for help: By pressing the down key
T
, the screen
displays the help screen).
A0EAF3E504DA
READY
for help
YMCK
TONER LOW
M
State
Warning message
Key guidance
Warning icon