Konica Minolta Bizhub 4000i User Manual Download Page 79

Page: 79 / 227

Menu item

Description

Caller ID

Off

On*

Alternate

Show the telephone number of the person sending the fax.

Fax Number Masking

Off*

From Left

From Right

Specify the format for masking an outgoing fax number.

Digits to Mask

0–58 (0*)

Specify the number of digits to mask in an outgoing fax number.

Enable Line Connected
Detection

Off

On*

Determine whether a telephone line is connected to the printer.

Notes:

•

Detection takes place when turning on the printer and before each call.

•

This menu item does not appear if Fax Transport is set to T.38.

Enable Line In Wrong Jack
Detection

Off*

Determine whether a telephone line is connected to the correct port on the
printer.

Notes:

•

Detection takes place when turning on the printer and before each call.

•

This menu item does not appear if Fax Transport is set to T.38.

Enable Extension in Use
Support

Off

On*

Determine whether a telephone line is used by another device such as another
phone on the same line.

Notes:

•

This menu item is monitored continuously after turning on the printer.

•

This menu item does not appear if Fax Transport is set to T.38.

Optimize Fax Compatibility

Conﬁgure the printer fax functionality for optimal compatibility with other fax
machines.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Fax Send Settings

Menu item

Description

Resolution

Standard*

Fine

Super Fine

Ultra Fine

Set the resolution of the scanned image.

Note:

A higher resolution increases fax transmission time and requires higher

memory.

Original Size

[List of paper sizes]

Specify the size of the original document.

Note:

Mixed Sizes is the U.S. factory default setting. A4 is the international

factory default setting.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus

Summary of Contents for Bizhub 4000i




































































































































































































































Search results

Summary of Contents for Bizhub 4000i

Reviews:

Brands by name

Popular brands

Konica Minolta Bizhub 4000i, User Manual

Search results

Summary of Contents for Bizhub 4000i

Reviews:

Brands by name

Popular brands