Faxing
Setting up the printer to fax
Notes:
•
The following connection methods are applicable only in some countries or regions.
•
During the initial printer setup, clear the fax function check box and any other function you plan to set up
later, and then select
Continue
.
•
If the fax function is enabled and not fully set up, then the indicator light may blink red.
Warning—Potential Damage:
To avoid loss of data or printer malfunction, do not touch cables or the printer
in the area shown while actively sending or receiving a fax.
Setting up the fax function
1
From the home screen, touch
Settings
>
Device
>
Preferences
>
Run Initial Setup
.
2
Turn off the printer, wait for about 10 seconds, and then turn it back on.
3
From the Before You Begin screen, select
Change the Settings and Continue with the Wizard
.
4
From the Fax/Email Server Setup screen, enter the needed information.
5
Finish the setup.
Setting up fax using a standard telephone line
CAUTION—SHOCK HAZARD:
To avoid the risk of electrical shock, do not set up this product or make
any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a
lightning storm.
Faxing
35
Summary of Contents for Bizhub 4000i
Page 1: ...User s Guide 2018 3 AAFM 9565 11A...
Page 30: ...2 Select the job to cancel Printing 30...
Page 147: ...Maintaining the printer 147...
Page 155: ...Paper jam in the front door 1 Remove the tray 2 Open the front door Clearing jams 155...
