Konica Minolta Bizhub 4000i User Manual Download Page 146

Page: 146 / 227

Insert the new pick tires.

Insert the tray.

Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

Turn on the printer.

Replacing the pick roller assembly

Turn off the printer.

Unplug the power cord from the electrical outlet, and then from the printer.

Remove the optional tray.

CAUTION—POTENTIAL INJURY:

If the printer weight is greater than 18 kg (40 lb), then it requires

two or more trained personnel to lift it safely.

Maintaining the printer

146

Summary of Contents for Bizhub 4000i




































































































































































































































Search results

Summary of Contents for Bizhub 4000i

Reviews:

Brands by name

Popular brands

Konica Minolta Bizhub 4000i, User Manual

Search results

Summary of Contents for Bizhub 4000i

Reviews:

Brands by name

Popular brands