Konica Minolta A0HF012 User Manual Download Page 257

Page: 257 / 281

Introduction

10-2

Introduction

Note

Any damage to the machine caused by the use of accessories not
manufactured or supported by KONICA MINOLTA will void your
warranty.

This chapter provides information about the following accessories.

Note

Installing accessories always requires that the machine and
accessories are turned off and unplugged during installation.

For details on the available options, refer to
http://printer. konicaminolta.com.

Tray 2

Lower feeder unit with 500-sheet tray included

Duplex Option

Auto duplexing

In order for the duplex option to be installed,
Tray 2 must be installed on the machine.

Duplex Option and
Attachment

Auto duplexing

The attachment is an interface unit for installing
the duplex option on the machine.

During installation, install the attachment before
installing the duplex option.

Summary of Contents for A0HF012


























































































































































































































































































Search results

Summary of Contents for A0HF012

Reviews:

Related manuals for A0HF012

Brands by name

Popular brands

Konica Minolta A0HF012, User Manual

Search results

Summary of Contents for A0HF012

Reviews:

Related manuals for A0HF012

Brands by name

Popular brands