Konica Minolta A0HF012, User Manual

Page: 122 / 281

Making Basic Copies 5-3
2
Press the Copy key.
3
Specify the desired copy settings.
"
For details on specifying the copy mode and the copy density, refer
to “Specifying the Copy Quality Setting” on page 5-3.
For details on specifying the zoom ratio, refer to “Specifying the
Zoom Ratio” on page 5-4.
For details on selecting the media tray, refer to “Selecting the
Media Tray” on page 5-5.
For details on setting 2in1 copying, refer to “Setting 2in1 Copying”
on page 5-6.
For details on ID card copying, repeat copying or poster copying,
refer to “Setting a Copy Function” on page 5-7.
For details on duplex (double-sided) copying, refer to “Setting
Duplex (Double-Sided) Copying” on page 5-11.
For details on setting collated copying, refer to “Setting Collated
(Sort) Copying” on page 5-13.
4
Using the keypad, specify the desired number of copies.
"
If the number of copies was incorrectly entered, press the Back
key, and then specify the correct number of copies.
5
To print color copies, press the Start-Color key. To print monochrome
copies, press the Start-B&W key.
Copying begins.
"
If the Stop/Reset key is pressed while copying,
JOB CANCEL
appears. To stop copying, select
YES
. To continue copying, select
NO
.
Specifying the Copy Quality Setting
Select the document type and copy density appropriate for the contents and
density of the document to be copied.
Selecting the Document Type
1
In the main screen (Copy mode), press the
+
or
,
key to select the cur-
rent copy quality setting, and then press the Select key.
2
Press the
+
or
,
key to select
MODE
, and then press the Select key.
3
Press the
+
or
,
key to select
MIX
,
TEXT
,
PHOTO
,
FINE/MIX
,
FINE/
TEXT
or
FINE/PHOTO
, and then press the Select key.
The main screen (Copy mode) appears again.