Konecranes SMV 10-1200B, Instruction Manual

Page: 63 / 102

Pos.no. Naming Illustration Page no.
1. Steering axle H2092-A page 84
2. Mast H124-A page 82
3. The carriage and the inner mast H124-A page 82
4. Upper support roller for the outer mast and chain wheel H124-A page 82
5. Forks H126-A page 84
6. Oil tap, engine H1961-A page 64
7. Refill, engine oil H1985-A page 65
8. Oil filter SCANIA H1839-A+H1661-A page 64
9. Oil tap, transmission H1958-A page 74
10. Refill, transmission oil H1847-A page 75
11. Oil filter, transmission H1959-A page 74
12. Breathing filter, transmission H1840-A page 75
13. Drive axle H2095-A page 78
14. Hydraulic filter H1979-A page 80
15. Fuel filter SCANIA H1976-A page 66
16. Water separator H1894-A page 66
Instruction manual SMV 10 600B – 60 1500B Publ. no. 6196.082 1117, Version 02
63
Service and maintenance
General rules applicable to lubrication
• Remove old grease and dirt from the nipples.
• Grease until clean grease appears.
• Only use the recommended grease.
• All sliding bearings must be relieved in order for the grease to be
able to penetrate.
• Sliding bearings require frequent greasing with small amounts of
grease. Roller bearings require more grease but are not greased as
often.
• Also check the function and bearing play when greasing.
• The stated greasing intervals are applicable under beneficial
conditions. For more demanding applications, more frequent
greasing intervals are recommended. This is in particular true
for sliding bearings.