84
Instruction manual SMV 10 600B – 60 1500B Publ. no. 6196.082 1117, Version 02
Service and maintenance
Greasing of forks and blades
• (1) The lower support rollers, two on each fork.
• (2) Upper support rollers, four per fork.
Greasing of the steering axle
• Remove old grease and dirt from the nipples.
• Grease the parallel tie rods, four points (1), two points on each
parallel stie rods (sliding bearing).
• Grease the spindle bolts (2), one top and one bottom on each
side.
• Grease the hub bearing (3), one nipple on each side. Grease
penetrates on the inside.
Greasing of the hinges
• Inspect and clean the hinges to the cabin door (1), the battery
cover (2) and the lid for the equipment for cabin tilting (3).
• Grease the hinges, open and close the doors in order to ensure
that all parts of the hinges have been greased.
