48
Instruction manual SMV 10 600B – 60 1500B Publ. no. 6196.082 1117, Version 02
Service and maintenance
Main power switch
WARNING
The main power switch does not cut the power
between the alternator and the battery. When
working with or in the vicinity of the alternator,
the negative cable for the battery must be removed.
In order to reduce the risk of electric shock and personal injuries,
jewellery and other conducting material must always be removed
prior to working on the electrical system of the machine.
The power may only be cut with the main power switch with
the engine running in an emergency.
Short-circuiting the battery may lead to a fire or explosion.
Danger of serious personal injury or fatality.
The battery contains corrosive acid.
Always use necessary protective equipment.
Batteries generate explosive hydrogen gas when being charged.
Ensure good ventilation and avoid sparks.
• The switch (1) is located on the right side of the machine.
• Turn the switch clockwise to switch it on.
• When switching off, turn the switch counter-clockwise and the
key will released.
Control of the conditions and pressure of the tyres
• Ensure that the tyres are not damaged or too worn.
• Remove any foreign objects from the tread pattern.
• Ensure that the tyres have the correct pressure in accordance
with the recommendations of the tyre manufacturer.
• Pump the tyres in accordance with applicable regulations.
WARNING
When replacing the tyres, only tyres from
approved manufacturers are approved.
Steering wheel and the control lever on the panel
When adjusting the position of the steering wheel and the panel:
• For height adjustment, push the lever (1) upwards.
• For tilt adjustment, push the lever (1) downwards.
