74
Instruction manual SMV 10 600B – 60 1500B Publ. no. 6196.082 1117, Version 02
Service and maintenance
TRANSMISSION DANA, OIL, OIL FILTER AND BREATHING
VALVE
Draining of the transmission oil
The transmission must have reached operating temperature when
the oil is replaced.
• Clean around the drain plug and the oil sump valve.
• Place a suitable container under the drain plug (1).
• Remove the drain plug and allow the oil to drain.
• Replace the drain plug (1).
WARNING
The transmission oil may be hot. Danger of
serious personal injury.
Carefully undo the drain plug to avoid burns.
Replacing of the transmission oil filter
• Carefully clean the outside of the filter unit.
• Place a container under the filter (2) to collect any oil.
• Loosen the filter by hand or using a filter wrench and dispose of
the filter in manner safe for the environment.
• Slightly lubricate the seal on the new filter.
• Screw on the new filter by hand until the O-ring seals.
NOTE
Do not fit too tightly.
• Start the engine and check that the filter is free from leaks.
• Check the oil level with the oil dipstick.
