Instruction manual SMV 10 600B – 60 1500B Publ. no. 6196.082 1117, Version 02
69
Service and maintenance
Filling up engine oil
• Remove the filling lid (2).
• Fill oil through the refill opening.
• Check the oil level with the oil dipstick (1). Fill to the
maximum level.
• Replace the filling lid (2).
• Close the engine cover.
BE CAREFUL
When test driving after replacing the oil and
filter, pay attention to the oil pressure gauge and
warning indicator on the instrument panel.
Also check that there are no leaks by the drain plug and oil filter.
In order to perform a careful inspection of the oil level, in
particular when the oil filter has been replaced, it is necessary
to switch off the engine again and then recheck the oil level
after about a minute.
