Komatsu WA250PT-5H, Operation & Maintenance Manual

Page: 93 / 255

OPERATION
Explanation of components
Switches
3-35
Monitor panel mode selector switch 1 0.
This switch (13) is used to switch the function of the character
display.
When the switch is released, it automatically returns to its origi-
nal position.
The basic operation is as follows.
Position (
):
Press here to select (confirm) each mode or operation.
Position (
„
):
Press here to cancel each mode or operation.
Monitor panel mode selector switch 2 0.
This switch (14) is used to switch the function of the character
display.
When the switch is released, it automatically returns to its origi-
nal position.
The basic operation is as follows.
Position (>): Press here to go on to the next screen, or to move
the cursor forward, or to increase the number when enter-
ing numerals.
Position (<): Press here to go back to the previous screen, or to
move the cursor back, or to reduce the number when enter-
ing numerals.
Front wiper switch 0.
When rotary switch (A) of this switch (15) is turned, the front
wiper will move.
If push button (B) is pressed, washer liquid will be sprayed out
onto the front glass while the button is being pressed.
Position(a): (OFF) stop
Position(b): (INT) Intermittent wiper
Position(c): Low-speed wiper
Position(d): High-speed wiper
Rear wiper switch 0.
When lever (C) of this switch (16) is turned, the rear wiper will
move.
Position (a): Washer liquid is sprayed out.
Position (b): OFF
Position (c): Wiper is operated.
Position (d): Washer liquid is sprayed out, wiper is operated.
9EM00795A
Display
window
Push
button
Rotary
switch
9EM00796A
Lever