1-12
WARNING: For reasons of safety, always
follow these safety precautions.
7. PRECAUTIONS DURING OPERATION
OPERATE CAREFULLY ON SNOW
‡ When working on snow or icy roads, there is danger that the machine may slip to the side on even
the slightest slope, so always travel slowly and avoid sudden starting, turning, or stopping.
‡ Be extremely careful when carrying out snow-clearing operations. The road shoulder and other
objects are buried in the snow and cannot be seen.
‡ When traveling on snow-covered roads, always install tire chains.
‡ When traveling on snow-covered slopes, never use the brakes to stop the machine suddenly.
Lower the bucket to the ground to stop the machine.
‡ The load will change greatly according to the type of snow, so reduce the load and be careful not
to let the machine slip.
DO NOT HIT WORK EQUIPMENT
‡ When working in places where there are height limits, such as in tunnels, under bridges, under
electric cables, or in garages, be extremely careful not to hit the work equipment.
METHOD OF USING BRAKES
‡ Do not put your foot on the brake pedal unless necessary.
‡ Do not depress the brake pedal repeatedly unless necessary.
‡ When traveling downhill, use the engine as a brake, and always use the right brake pedal.
WORKING ON LOOSE GROUND
‡ Avoid operating your machine too close to the edge of cliffs, overhangs, and deep ditches. If these
areas collapse, your machine could fall or tip over and result in serious injury or death. Remember
that the soil after heavy rain or blasting is weakened in these areas.
‡ Earth laid on the ground and the soil near ditches are loose. They can collapse under the weight
or vibration of your machine.
‡ When operating in places where there is danger of falling rocks or danger of the machine turning
over, always install ROPS and a seat belt.
Summary of Contents for WA20-2
