3-43
24. SERVICE PROCEDURE
24. SERVICE PROCEDURE
24.3.3 CHECK FUEL LEVEL, ADD FUEL
WARNING
When adding fuel, never let the fuel overflow. This may cause
a fire. If spilling fuel, thoroughly clean up any spillage.
1.
Turn the engine starting switch to the ON position, then check
the fuel level with fuel gauge
G
.
After checking, return the starting switch to the OFF position.
2.
Upon completion of work, add fuel through filler
F
until the fuel
tank is full.
For details of the method for opening and closing the cap, see
“11.4 CAP WITH LOCK”.
For details of the fuel to use, see “20. USE OF FUEL, COOLANT
AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”.
3.
After adding fuel, tighten the cap securely.
Fuel capacity: WA20
25 ¬ (6.6 US gal, 5.5 UK gal)
WA30, 40, 50
42 ¬ (11.9 US gal, 9.2 UK gal)
Summary of Contents for WA20-2
