5-3
Always install a seat belt on machines equipped with ROPS.
WARNING
‡ Before fitting the seat belt, check that there is no abnormality
in the mounting bracket and mounting belt of the belt. If the
belt is worn or damaged, replace it.
‡ Always fasten the seat belt before starting operations.
‡ Always use the seat belt during operations.
‡ Do not twist the left or right side of the seat belt when
fastening it.
27.1 FASTENING AND REMOVING BELT
Fasten the belt so that it is tight without being too tight.
1.
Sit on the seat, depress the brake pedal fully, and adjust the seat
so that your back is pressed against the backrest.
2.
After adjusting the seat position, adjust teaser belt
1
. Tense the
teaser belt and install it when there is no one sitting on the seat.
(Machine equipped with suspection seat)
3.
Sit on the seat, take buckle
2
and tongue in your left and right
hands, insert tongue into buckle
2
, and pull the belt to check that
it is securely locked.
4.
When removing the belt, raise the lever of buckle
2
to free the
belt.
Adjust the length of the buckle and tongue so that the belt
follows your body without twisting, and adjust so that the buckle is
in the middle at the front of your body.
27. SEAT BELT
Summary of Contents for WA20-2
