2-42
12.9.5 LOADING OPERATIONS
Select the method of operation which will give the minimum
amount of turning and travel in order to provide the most efficient
method for the jobsite.
WARNING
‡ Always keep the working area flat. Do not turn suddenly or
apply the brake suddenly when traveling with a raised load.
These actions are dangerous.
‡ It is also dangerous to drive the bucket at high speed into a
stockpile or pile of rocks.
NOTICE
‡
If the tires slip, the tire life will be reduced, so do not allow the
tires to slip during operation.
‡
Avoid excessive shaking of the bucket.
CROSS DRIVE LOADING
Always set the wheel loader facing at a right angle to the
stockpile. After digging in and scooping up the load, drive the
machine straight back in reverse, then bring the dump truck in
between the stock pile and the wheel loader.
This method requires the least time for loading, and is extremely
effective in reducing the cycle time.
12. OPERATION
12. OPERATION
V-SHAPE LOADING
Position the dump truck so that the direction of approach of the
wheel loader is approx. 60° from the direction of approach to the
stockpile. After loading the bucket, drive the wheel loader in reverse,
then turn it to face the dump truck and travel forward to load the
dump truck.
The smaller the turning angle of the wheel loader is, the more
efficient the operation becomes.
When loading a full bucket and raising it to the maximum height,
first shake the bucket to stabilize the load before raising the bucket.
This will prevent the load from spilling to the rear.
Precautions when piling up loads
When forming products into a pile, be careful not to let the rear
counterweight come into contact with the ground.
Do not set the bucket to the DUMP position when carrying out
piling-up operations.
AE061990
AE062000
AE062010
Summary of Contents for WA20-2
