.
ATTACHMENTS, OPTIONS
SHOE SLIP CONTROL
RIPPING OPERATIONS
SHOE SLIP CONTROL
This makes it possible to reduce the frequency of operation of the
decelerator pedal by the operator, and contributes to reduction in
operator fatigue. It also prevents wasteful shoe slippage, improves
the service life of the undercarriage, and reduces fuel
consumption.
Speed ranges that can be used: F1
Applicable operations: Ripping
In normal ripping operations, the operator uses the decelerator
pedal to control the engine speed while carrying out ripping. If the
shoe slip control is turned ON, the shoe slip control system aids the
operator in carrying out this control.
When the shoe slip control switch is turned ON, the rock selection
mode is automatically set to [3].
Carry out operations in this condition, and if the shoe slip ratio is too
high, press a switch in the hard direction to set the mode to [4] or
[5].
If the shoe slip ratio is low and there seems to be lack of power,
press the switch in the soft direction to set the mode to [2] or [1].
6 - 23
Summary of Contents for D475A-5E0
