Kollmorgen MKD-C Series, Product Safety Manual

Page: 10 / 80

MKD Product Safety Guide | 1 English
1.3 Product life cycle handling
1.3.1 Transport
Transport the MKD modules in accordance with IEC 61800-2 as follows:
Transport only by qualified personnel in the manufacturer’s original recyclable packaging.
Avoid shocks while transporting.
Vibration/Shock: MKD modules are tested for environmental class 3M1 of IEC 60721-3-2.
Store at or below maximum stacking height of 8 cartons
Transport only within specified temperature ranges: -25 to +70 °C, max. rate of change 20
K/hour, class 2K3.
Transport only within specified humidity: maximum 95% relative humidity, no con-
densation, class 2K3.
The devices contain electrostatically sensitive components that can be damaged by incor-
rect handling. Electrostatically discharge yourself before touching the device. Avoid contact
with highly insulating materials, such as artificial fabrics and plastic films. Place the device
on a conductive surface.
If the packaging is damaged, check the unit for visible damage. Inform the shipper and the
manufacturer of any damage to the package or product.
1.3.2 Packaging
The MKD packaging consists of recyclable cardboard with inserts and a label on the outside
of the box.
Model Package Dimensions
(mm) HxWxL
Total Weight
(kg)
MKD-C003007 580 x 350 x 170 22.5
MKD-N060007
580 x 350 x 110 8.5
MKD-N060607
MKD-N120007
MKD-N120607
MKD-N121207
MKD-N240007 580 x 350 x 110 9.5
MKD-N480007 580 x 350 x 140 11.5
1.3.3 Storage
Store the MKD modules in accordance with IEC 61800-2 as follows:
Store only in the manufacturer’s original recyclable packaging.
Store at or below maximum stacking height of 8 cartons
Store only within specified temperature ranges: -25 to +55 °C, max.rate of change 20
K/hour, class 1K4.
Storage only within specified humidity: 5 to 95% relative humidity, no condensation, class
1K3.
Store the MKD in accordance with the following duration requirements:
Less than 1 year: without restriction.
More than 1 year: capacitors in the MKD-C must be re-formed before setting up and
operating the system. Re-forming procedures are described in the Kollmorgen
Developer Network (
Forming ).
10 Kollmorgen | kdn.kollmorgen.com | January 2019