INSTALLATION
Install and uninstall the sensor controller
a. Install the sensor controller box.
b. Install the screw.
c. Connect the sensor wire.
Install and uninstall the Fixture, Valve
Assembly
Unscrew the screws on the Fixture, Valve Assembly. Remove
the Fixture, Valve Assembly from the urinal by moving it.
a.
b.
c.
-5-
Install DC Power Unit
1. Take out battery case assy., and loosen the screws (17).
Place 4 AA batteries into the battery case according to
negative and positive electrode marks on the battery case
cover (18). Tighten the screws on the battery case cover
(18).
do not mistake the battery electrodes, and do not
use the new and used batteries together.
2. Then insert the battery pack in the battery box bracket,
connect each colored connector to the corresponding
connector of the same color.
NOTE:
1.
(17)
(18)
4
5
(18)
(17)
2.
Fig.3
3
Install
Battery Box Asm
Bracket, Valve Asm
Control Box Asm
17
18
1356730-T01-B
