Fig.#11
11
Install fragrance porcelain
(for K-21842T-WXEW only)
1. Insert the scent top into the plug.
2. Take out the tube. Fill fragrance into
the tube. Do not overfill to avoid
overflow.
3. Insert the plug into the tube.
4. Insert the tube into the hole on the
urinal cover.
Be careful when filling
fragrance into the tube. Do not drop it
onto the electrical components to
avoid short circuit and malfunction.
Caution:
(
K-21842T-WXEW)
1.
2.
3.
4.
Notice:
The first 2 minutes with power is the standby time for
adjusting sensing distance. Persons or subjects
should avoid standing before the sensor (See Fig.2).
The sensor will not flush during.
2
(
2)
USER'S GUIDE
USER'S GUIDE
Electrolyzed Water
The urinal will take a flush Electrolyzed Water every two
hours. If the urinal is used during flushing, the electrolysed
water will stop.
2
Deodorizing Flushing
The urinal will take a flush automatically when it's used 3 or 4
times in 2 minutes.
Replacement of Batteries
When the batteries run out, please remove the Battery Box
Assembly by following the battery installation steps and then
replace the batteries.
2
3-4
-9-
MAINTENANCE
Clean the Filter Screen
If the flushing volume reclines sharply after installation or
used for a long time with no cause from water pressure, the
filter may need a wash. Please operate as following steps:
Remove the fixed cap
a. Turn off the water supply and power
supply before cleaning the filter.
b. Avoid damaging or losing the filter during
cleaning.
Caution:
and take out the filter, clean the filter
and then reinstall it.
a.
b.
Filter
Fixed Cap
Fig.12
12
1356730-T01-B
