-6-
Power Connection
1. Please directly reference to install DC Power Unit when
installing K- 21842T (DC).
2. Please match K-16305T-NA AC power unit when installing
K-21842T-C05. The way of installation is as below:
1.
K- 21842T
2.
K-21842T-C05
K-16305T-NA
CAUTION:
a. Do not connect 220V AC Power supply to DC wiring
terminal.
b. Do not damage the covering of AC power unit or
remove screws to avoid leakage.
c. Outlet of AC power unit upward prohibited.
A. Fig.6: AC power unit connect way:
AC power unit is connected to electric control box by
connection wire.
a.
220V
b.
c.
A.
6
Fig.4
4
AC
Connector
Wire prepared
by customer
Connector
Connect with the same color wire,
and protect connect area by insulation tape.
16305T-NA
AC Power Unit
Control Box Assy.
Outlet Downwards
Outlet Upwards
Connect to
Sensor
Connect to
Sensor
Connect to AC
Power Supply
Connect to AC
Power Supply
B. When installing the power uint in the bracket, please layout
bushing according to Fig.5 and thread wire through the
bushing.
Fig.5: Connection sketch while installing power uint in the
bracket.
One AC power unit can supply one
sensors at most.
CAUTION:
B.
5
Fig.5
5
AC Power Unit
AC Power
AC
Install in
the bracket
Bracket
Control Box Asm
Bushing
600
602
45
1356730-T01-B
