16
1478624-W2-A
Cut a hole in plasterboard using a 152mm hole cutter and build a surface up to the
sides of the Building in Box ready for waterproof finishing.
75mm
75mm
Note: Refer to details of cavity depth and finished wall thickness.
Apply a liberal coat of waterproof adhesive (not supplied) around the product.
Use a suitable waterproof shower tanking adhesive. We recommend a liquid based
plumbing type to be applied with a paint brush, available from tile / builder merchants.
A sufficient amount is required for coating this area twice during the installation.
Built up surface / Plasterboard
(non waterproof)
Plan for front of
finished wall surface
(waterproof) to be
between these
measurements
Finished Wall
Thickness
Depth
Finished Wall
Between Max and Min
1477011-6-A
Max
Min
