32
1478624-W2-A
For solid walls drill the fixing holes for
the backplate with a 6mm drill and
insert the wall plugs (supplied). For
other types of wall structure alternative
fixings may be required (not supplied).
Carefully fit backplate over the outlet
pipe and secure using the fixing
screws.
Place the retaining ring and nut over the
pipe in the orientation shown and tighten
in place using suitable size wrench.
DO NOT
overtighten.
Fit the overhead body over the pipe
and secure with the fixing screws
provided.
6.0mm
a
b
c
e
g
f
h
d
a
b
c
e
g
f
h
d
Caution! Take care not to damage
the foam Seal in the back of the
backplate.
Overhead
Body
a
b
c
e
g
f
h
d
Retaining Ring
Retaining Nut
a
b
c
e
g
f
h
d
Note: Make sure that the pipe is pushed
until it hits the internal stop feature.
Important! The retaining ring and nut
MUST be fitted to ensure the pipework
is secure and that the product doesn't
leak.
Note: Apply grease
around the pipe.
Ensure the yellow nut is loose but still
engaged.
Place the shroud onto the overhead arm as
shown and fit overhead arm into overhead
body.
Secure by tightening the yellow nut on the
overhead body. Hand tighten only.
Overhead
Arm
Overhead Body
Yellow Nut
Shroud
