23
1478624-W2-A
Front View of Shroud
installed on Valve
Place the shroud over the valve ensuring the logo is in the correct orientation as
shown.
Push the shroud onto the fixing plate, and clip into place.
Pull the shroud gently to ensure its clipped into place.
Note: Make sure that the spline is oriented in line
as shown above.
Important! Ensure the area
marked "Top" is as shown.
Align the splines in order to fit
over the valve / control coupler.
OR
Mixing Valve
Only for Lit Variants
Shroud
Shroud
Grommet
Concealing
Plate
Slot for Grommet at
internal side of shroud
Push shroud on and
clip in position.
