Installation Instructions
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
© J A D O U S A 2 0 0 5
P r o d u c t s
L u x u r y F a u c e t s a n d A c c e s s o r i e s
JADO USA
6615 West Boston
Chandler, AZ 85226
Phone:(8OO) 227-2734
Fax: (8OO) 552-JADO(5236)
www.jadousa.com
H 9 6 5 5 7 5
H 9 6 5 5 7 5
H 9 6 5 5 7 5
H 9 6 5 5 7 5
6
HELPFUL HINTS FOR CLEANING AND MAINTENANCE
The solid brass product you have just purchased has been designed to give you years of beauty and service. It is
important to bring to your attention proper care and maintenance procedures, which will ensure its lasting beauty.
First and foremost, it is important (as it is with any fine piece of jewelry or furniture) that the product be wiped clean and
dry with a soft damp cloth after every use.
Second, under no circumstances should an abrasive cleaner or combination cleaner/polish be used on JADO products.
The abrasive nature of such products will eventually destroy the finish and void the warranty.
In the event of stubborn blemishes shown on the finish, we recommend use of Windex window cleaner with a soft cloth,
but we do not recommend it be used on an everyday basis.
It is important to note that it is normal to expect signs of usage over time.
Thank you for selecting JADO for your home.
ROUGHING-IN
DIMENSIONS
Widespread Lavatory Faucet
with Pop-Up Drain
TO THE PURCHASER OF JADO BRASS PRODUCTS
Attention installer:
Please leave This Pamphlet for The Owner
POLISHED BRASS AND CUSTOM FINISH WARRANTY
: A 1 YEAR LIMITED FINISH WARRANTY from date of purchase is provided to the
first residential owner against defects in materials and workmanship. Due to the ever-changing finish of Patina products, the finish warranty
is excluded. Warranty shall not include problems related to the installation of the product.
MECHANICS
MECHANICAL WARRANTY:
A LIFETIME LIMITED WARRANTY is provided to the first residential owner on parts to be free from failure
related to defects in materials and workmanship but not installation.
CONDITIONS TO WARRANTIES
JADO Bathroom & Hardware Manufacturing Corp. places the following conditions on its finish and mechanical warranties to the first residential owner only.
JADO finish and mechanical warranties are limited to products correctly installed and used in a residential environment.
JADO warranties will not assume liability for damage due to abuse, mishandling, incorrect installation, improper maintenance, or deterioration
due to normal use.
JADO will not be liable for labor or other costs relating to the sale, installation, or replacement of their products.
In the event of a defect in any JADO product covered by this warranty, the product must be returned to the dealer where originally purchased
along with proof of purchase.
JADO's obligation under the warranty shall be limited to the repair or exchange of any product which has been determined by JADO to be
defective after appropriate examination.
The state of California has mandated under Proposition #65 that
manufactures of products, including faucets which come into
contact with potable water, must warn the consumer if the product
contains materials listed by the state as a carcinogen or
reproductive toxin. Lead, which is contained in all brass faucets in
limited amounts appears on the State's list.
Preliminary industry tests have indicated that users of faucets
made from brass face no significant danger, however,
California Proposition #65 requires that we provide you with the
following notice:
NOTICE: JADO products conform to industry
requirements of water conservation under the
ASTM / ANSI A112.18.1M-1994 plumbing code.
Lavatory, bidet, wet bar and kitchen faucet sets
have a maximum flow rate of 2.2GPM. Shower
heads, hand showers and body sprays have a
maximum flow rate of 2.5GPM.
Warning: This product contains an element
known to the State of California to cause cancer
of reproductive harm.
JADO BATHROOM AND HARDWARE MFG. CORP.
6615 West Boston
Chandler, AZ 85226
JADO warrants this product to be free from defects in materials or workmanship for as long as the original consumer purchaser
owns their home.
JADO will provide, free of charge, at it’s sole option, replacement part(s) or product (or if no longer available, a comparable
product) to replace those which have proven defective in materials or workmanship.
Proof of purchase (original sales receipt) from the original consumer purchaser must be made available to JADO for all limited
warranty claims. This limited warranty is non transferable. It does not apply in the event of product damage due to the use of other than
genuine JADO replacement parts, installation error, abuse, misuse, or improper care and maintenance (whether performed by
a plumber, contractor, service provider or member of the purchaser’s household). The limited warranty excludes damage due to aggressive
air or water conditions, or harsh or abrasive cleaners and/or materials. This limited warranty excludes all industrial, commercial and business
usage, whose purchasers are hereby extended a two year limited warranty (with the exception of solenoid valves and other electronic
components which carry a one year limited warranty) applying to all other terms of this limited warranty except duration. This limited warranty
does not cover labor charges incurred and/or damages sustained in installation, repair or replacement, nor incidental or consequential
damages, all of which are expressly disclaimed. This limited warranty is applicable only to JADO faucets manufactured after June 1, 1996
and installed in the United States and/or Canada.
This limited warranty gives the original consumer purchaser of an JADO faucet specific legal rights which may vary from state to
state or from province to province. This limited warranty does not cover any liability for consequential or incidental damages, all of which
are hereby expressly disclaimed, or the extension beyond the duration of this limited warranty of any implied limited warranties, including
those of merchantability or fitness for an intended purpose. In some states or provinces the exclusion or limitation of incidental or consequential
damages is not allowed, so those exclusions may not apply to you.
JADO Bathroom & Hardware Manufacturing Corp. provides the following warranties only to the first residential owner of our products.
FINISHES
JADO FAUCET LIFETIME FUNCTION AND FINISH LIMITED WARRANTY
Plumbers' Putty or Caulking
Adjustable Wrench
Phillips Screwdriver
Channel Locks
TOOLS REQUIRED
Tubing Cutter
Regular Screwdriver
Teflon Tape
1
SPOUT ASSEMBLY
Turn off hot and cold water
supplies before beginning.
CAUTION
Product Numbers
832/3O3/...
IQ
™
GROOVE IN
(FAUCET BASE)
SWIVEL
SPOUT
1
5
6
10
3
2
4
Seat O-RING (1) into under side of ESCUTCHEON RING (2).
Feed SPOUT HOSES (3) and MOUNTING STUD (4)
through ESCUTCHEON RING (2) and the mounting hole of
lavatory or mounting surface.
Remove mounting hardware items (5 & 6) from MOUNTING STUD (4).
Seat ESCUTCHEON RING (2) with collar facing up into
groove in faucet base.
From below, install RETAINING WASHER with
GASKET (5) onto MOUNTING STUD (4). Secure
Faucet with MOUNTING NUT (6) using 13mm
HEX KEY (10) provided. Before final tightening,
adjust Faucet so that it is centered. Tighten
MOUNTING NUT (6) to complete mounting.
2
INSTALL VALVE BODIES AND HANDLES
4
3
WATER SUPPLY CONNECTIONS
Connect water supply to VALVE BODIES (1) with 1/2" IPS
FLEXIBLE SUPPLIES (3) or 3/8" O.D. BULL-NOSE RISERS (4).
Use wrench to tighten connections.
Do not over tighten. Be careful not to kink copper supply when
bending. Use tubing cutter to cut to proper length.
1
4
FERRULE
NOTE: FLEXIBLE SUPPLIES OR BULL-NOSE RISERS MUST BE
PURCHASED SEPARATELY.
COUPLING
NUT
11 12
10
COLD
7
9
FAUCET
RECESS
VIEW "A"
VIEW "A"
8
8
APPLY SEALANT
OR TEFLON TAPE
3
A FOAM SEAL (1) is installed on underside of FLANGE (2). (Plumbers
Putty may be used in place of FOAM SEAL (1) if desired.)
Apply sealant or Teflon tape to threads of TAILPIECE (10) and
thread into DRAIN BODY (7) making a water tight seal.
Drop FLANGE (2) into LAVATORY DRAIN (3). From below assemble
RUBBER GASKET (4), PLASTIC WASHER (5) and LOCK NUT (6) onto
DRAIN FLANGE (2). Do not tighten fully.
INSTALL POP-UP DRAIN
FIG. 3a
FIG. 3b
FIG. 3c
FIG. 3c
FIG. 3a
FIG. 3b
1
4
3
2
5
6
7
8
6
9
2
Adjust STOPPER (13) height by repositioning POP-UP ROD (16) in SWIVEL (15)
and tightening SET SCREW (18).
Assemble POP-UP SWIVEL (15) to PIVOT ROD (11) but do not tighten.
Drop POP-UP ROD (16) through other hole in POP-UP SWIVEL (15) and
tighten SET SCREW (17)
Assemble PIVOT ROD (11), and PIVOT NUT (12) as shown. Install CONCAVE
WASHER (19) into PIVOT ROD OPENING (9) if not preinstalled. Hand tighten
PIVOT NUT (12). Drop STOPPER (13) into drain.
(
To vandal proof drain rotate STOPPER (13) so PIVOT ROD (11) goes
through EYE (14) of STOPPER (13)
. Make connection to "P" TRAP.
Inspect inside DRAIN BODY (7) that SEAL (8) is installed. Thread
DRAIN BODY (7) tight against FLANGE (2) to make a water tight seal.
10
9
7
6
12
19
16
15
17
18
2
10
14
13
11
The PIVOT ROD OPENING (9) in DRAIN BODY (7) should face the rear
of the lavatory. Tighten LOCK NUT (6) on FLANGE (2) to make a water
tight connection with channel locks. Do not over tighten.
From underside of faucet body install POP-UP ROD (7) with
threaded end up into SPOUT BASE (8). Hold POP-UP KNOB (9)
in recess of faucet body and thread POP-ROD (7)
into POP-UP KNOB (9).
See View "A".
HOSE CONNECTIONS
Insert VALVE BODY (3) through mounting hole from underside
of lavatory or mounting surface.
Note: Maximum mounting thickness is 1-1/4".
Install O-RING (9) into groove in FLANGE (4).
Thread FLANGE (4) onto VALVE BODY (3) until tight against
STOP WASHER (14).
Align VALVE BODY (3) as shown and from below tighten
LOCKNUT (5) to secure the VALVE BODY (3) to the
mounting surface.
Install O-RING (13) into under side of HANDLE BASE (2). Turn
VALVES to off position. Align HANDLES (1) as shown or as
desired. Thread HANDLE BASE (2) until tightly seated against
FLANGE (4).
Insert FIBER WASHERS (10) into COUPLING NUTS (11) of SPOUT
HOSES (12). Left supply to hot VALVE BODY (3) and right supply to
cold tighten making water tight connections.
Important: Loop
SUPPLY HOSES (12) as illustrated so they do not kink.
1
2
3
HOT
8
4
13
9
5
6
14
7
JADO
1-1/4'' MAX.
(44mm)
MOUNTING
SURFACE
Unpack valve assemblies and remove HANDLE (1) by unthreading
HANDLE BASE (2) from VALVE BODIES (3). Unthread FLANGES (4)
from VALVE BODIES (3).
Thread LOCKNUT (5) to bottom of VALVE BODY (3). Make sure
SPACER (6), BRASS WASHER (7) and RUBBER WASHER (8) are
installed in that order.
5
TEST INSTALLED FAUCET AND
CONNECTIONS FOR LEAKS
Remove Aerator from faucet.
With HANDLES (1) in OFF position, turn on
WATER SUPPLIES (2) and check all
connections for leaks.
Operate both HANDLES to flush water
lines thoroughly.
1
2
2
Operate LIFT ROD (3) and fill lavatory with water.
Check that DRAIN STOPPER (4) makes a
good seal and retains water in lavatory. Adjust
stopper height by repositioning Lift Rod (3) and
tightening SET SCREW (5).
Release DRAIN STOPPER (4) and check all drain
connections and "P" trap for leaks. Tighten if
necessary.
Replace Aerator.
4
3
3
5
JADO
JADO
1-1/4" MAX.
(32mm)
1/2" NPT
CROSS
HANDLE
NOTE: MOUNTING HOLES
ARE 1-3/8" D.
1-1/8" D.
(28mm)
2-3/8" D.
(60mm)
6" TO 12" MAX.
(152mm TO 305mm)
1-3/4" MAX.
(44mm)
MOUNTING
SURFACE
1-3/4" MAX.
(44mm)
11-1/4"
(286mm)
5-7/8"
(149mm)
5-1/8"
(130mm)
7-1/2"
(190mm)
2-1/8" D.(54mm)
JADO
JADO
2" MAX.
(51mm)
7" MAX.
(178mm)
1-1/4" O.D.
(32mm)
