25
2. OSD Lang : Set the OSD language options.
3. Save the last set to open with the related
options are: On/ Off.
If this function is enabled, it allows you to continue
the playback of a film (DVD) even after switching
off or remove of a disk. The player stores all
settings like play position or used language and
continues playback with these settings after the
disk is reinserted.
This function will be enabled or disabled via the
setup-menu of the DVD-player.
Dolby Digital Setup
STEREO: Select this to set the sound output to
Stereo mode.
L-MONO: Select this to set the sound output to
left mono mode, meaning it will reproduce the left
mono signal to the left and right channels.
R-MONO: Select this to set the sound output to
right mono mode, meaning it will reproduce the
right mono signal to the left and right channels.
MIX-MONO: Select this to reproduce both
channels mixed together.
If you have Dolby digital output in your amplifier/
decoder, you may select stereo, left, right and
mixed sound accordingly.
6Ê-iÌÕ«ÊiÕÊ
ÌiÀv>ViÊÕVÌ
Press the DVD Setup button to activate the DVD
player OSD menu, the DVD setting menu by the
romote control the bottom section arrow buttons
and OK button. press the Left/Right arrow buttons
to move between the different sub-menus; press
the Up/Down arrow buttons to highlight the
prefered option, confirm with the ok button. Press
the DVD setup button to exit the OSD menu.
General Settings page
1. TV DISPLAY: Set the ratio of output to the
television signal options are:
Normal/ PS, Normal/LB, WIDE, the current
default settings is Normal/ PS
Note:
1. Normal/PS
Normal Pan and Scan is used for most
normal television broadcasts and it is the
default setting. It has an aspect ration of
4:3. If you select this setting when viewing
a DVD the picture will fill the screen, but
you will not see the left and right edges of
the picture.
2. Normal/LB
Normal Letter Box will show the DVD in
its original aspect ratio so depending on
the size of your television screen you may
see black borders above and below the
picture.
3. Wide
Choose this setting if you have a
widescreen television.
4. The DVD must be stopped when setting
system.
Summary of Contents for PRO16
Page 1: ......