29
/ÀÕLià Ì}
If you have any problems, check the counter measures for each symptom listed below. The following
symptoms may have caused by Inappropriate adjustment rather than actual malfunction of the unit. If the
trouble persists, contact the service center.
PROBLEM
POSSIBLE SOLUTION
No sound and picture
- Check that the main plug has been connected to the mains.
- Check the picture contrast and brightness settings.
Normal picture but no
sound
- Check the volume.
- Sound muted? Press the MUTE button.
- Try another channel the problem may be with the broadcast.
- Are the audio cables installed properly.
The remote control
does not work
- Ensure there is no obstructing object between RCU and sensor on LCD.
- Are batteries installed with correct po to +,- to -).
- Correct remote operating mode set: TV, VCR etc.?
- Install new batteries
Power is suddenly
turned off
- Is the sleep timer set.
- Check the power control settings. Power interrupted.
Picture appears slow
after switching on
- This is normal, the image is muted during the product startup process.
Please contact your service centre if the picture has not appeared
after five minutes.
No color or poor picture
- Adjust the colour in menu option.
- Keep sufficient distance between the product and the VCR.
- Try another channel, the problem may be with the broadcast.
- Are the VIDEO cables installed properly?
- Activate any function to restore the brightness of the picture.
Horizontal/vertical bars
or picture shaking
- Check for local interference such as an electrical appliance or power tools.
Poor reception on
some channels
- Channel signal is weak, recheck antenna on roof.
- Check for sources of possible interference.
Lines or streaks in
pictures
- Check the antenna(Change the direction of the antenna).
No output from one of
the speaker
- Adjust balance in menu option.
Summary of Contents for PRO16
Page 1: ......