17
Basic Operation
Turning the TV On and Off
How to turn the TV on or off
1. Connect the small round plug on the power
adaptor cable to the power DC 12V input
socket on the side panel of the TV, connect
the mains cable between the power adaptor
and mains supply.
2. Press POWER button on the remote control or
button on the top panel of LCD TV.
3. Normal picture will be displayed on the screen
about 6 seconds. If no signal input, “No Signal”
will be displayed on the screen.
4. If temporary POWER off is required, press
POWER button on the remote control or button
on the top panel.
5. If you want to completely switch off the power
for this unit, unplug main cabel from the
polarizod AC outlet.
6. After switching off the unit, you should turn on
the TV again at least 5 seconds later.
Status indication lamp
Green: In power on mode.
Red: In standby mode.
Auto power-off
If there is no signal input in any Mode, the TV will
automatically accesses the standby state in about
15 minutes.
Memory before turning TV off
The settings of picture and the preset channels
will be memorized at turning off the unit.
When being started up again, the unit will work
according to the mode set before being turned off.
Menu Operation
1. Input Setup
Press the “SOURCE” button on either the
remote control or the top panel of the LCD TV.
Repeat pressing the “Source” button to select
the desired “source”. DTV, ATV, AV, S-VIDEO,
DVD, YPbPr, HDMI,PC.
2. Channels Selection
There are four ways to select channel:
1) Using 0~9 keys on the remote
control to select channel directly.
2). Using CH+/- key on the remote control or
on your TV to select channel.
3) Press RECALL key to turn to previous
channel, press it again to return to current
channel.
Note: RECALL is not activated if no channel
has been changed after TV turning on.
4) Select channels from “All Channels List” or
“Favorite Channels List”.
Summary of Contents for PRO16
Page 1: ......