15
Connecting VCR
These instructions assume that you have already
connected your TV to an antenna or a cable TV
system. Skip step 1 if you have not yet connected
to an antenna or a cable system.
5
VCR Rear Panel
Audio Cable (Not supplied)
Video Cable (Not supplied)
RF Cable (Not supplied)
TV Rear Panel
S-VIDEO
Follow the instructions in Viewing a VCR or
Camcorder Tape to view your VCR tape. Each
VCR has a different back panel configuration.
When connecting a VCR, match the colour of the
connection terminal to the cable. We recommend
the use of cables with a Ferrite Core.
1. Unplug the cable or antenna from the back of
the TV.
2. Connect the cable or antenna to the ANT IN
terminal on the back of the VCR.
3. Connect an RF Cable between the ANT OUT
terminal on the VCR and the ANT IN terminal
on the TV.
4. Connect a Video Cable between the VIDEO
OUT jack on the VCR and the VIDEO IN jack
on the TV.
5. Connect Audio Cables between the AUDIO
OUT jacks on the VCR and the AUDIO L and
AUDIO R jacks on the TV.
6. Connect a Video Cable between the S-VIDEO
OUT jack on the VCR and the S-VIDEO
IN jack on the TV.
If you have a mono (non-stereo) VCR, use a
Y-connector (not supplied) to hook up to
the right and left audio input jacks of the TV. If
your VCR is stereo, you must connect
two
cables.
Connecting DVD Player/Set-Top Box
The rear panel jacks on your TV make it easy to
connect a DVD to your TV.
TV Rear Panel
Audio Cable (Not supplied)
2
Component Cable (Not supplied)
DVD Player/Set-Top Box
Component video separates the video into Y
(Luminance (brightness)), Pb (Blue) and Pr
(Red) for enhanced video quality.
Be sure to match the component video and audio
connections.
For example, if connecting the video cable to
COMPONENT IN, connect the audio
cable to COMPONENT IN also.
Each DVD player/STB has a different back panel
configuration.
When connecting a DVD player/STB, match the
colour of the connection terminal to the
cable.
We recommend the use of cables with a Ferrite
Core.
1. Connect a Component Cable to the
COMPONENT IN [Y, PB, PR] jacks on the TV
and the COMPONENT [Y, PB, PR] jacks on
the DVD player.
2. Connect Audio Cables to COMPONENT IN
[R-AUDIO-L] jacks on the TV and the AUDIO
OUT jacks on the DVD player.
NOTE: YPbPr/AV/S-Video use a common
audio in.
Summary of Contents for PRO16
Page 1: ......