7
General Description
Overview of Side the DVD Panel
1. Press the EJECT button when the power is
on the disc will eject. Put the disc in the slot
slightly, with the data side facing towards you.
Press EJECT button again the disc is pulled
in automatically, and the unit starts playing
automatically (Without auto play function for
JPEG discs).
2.
After placing a disc in the disc tray, press
button to play the disc, and press
button
twice to pause.
3. Press “ ” button to stop in two modes:
press the button once, STOP memorize the
interrupt position and the OSD shows “Press
play key to continue”, press “ ” button twice
to completely stop disc, the osd show “stop”
and then press the”play” button to resume
play from the beginning of the disc.
4. Press
button to skip backward DVD
chapter or VCD program or CD track.
5.
Press
button to skip advance DVD chapter
or VCD program or CD track Note: player
will not skip forward or backward during
“WARNING” section of a DVD disc, single
chapter DVD or single track CD cannot skip.
6. Press
button fast forward through the disc,
repeatedly pressing the button, the player will
fast forward playing as following.
Overview of Top and Side Panel
!GENTITLE-INSERT
1. SPEAKER
2. REMOTE CONTROL SENSOR
Aim the remote control towards this spot on
the TV.
3. POWER INDICATOR
Green: In power on mode.
Red: In standby mode.
4. SOURCE
Toggles between all the available input
sources (DTV, ATV, AV, S-Video, DVD,
YPbPR, HDMI, PC)
5. MENU
OSD menu button, to enter the TV setup
menu.
6. CH +/-
Press to change channels.
In the on-screen menu, use the CH +/- buttons
as up/down arrow buttons.
7. VOL+/-
Press to increase or decrease the volume.
In the on-screen menu, use the VOL +/-
buttons as left/right arrow buttons.
8.
Standby button
Press
button to toggle between normal and
standby mode.
Ĺ
ķ
ĸ
ķ
LABEL SIDE TO BACK
INPUT
Summary of Contents for PRO16
Page 1: ......