14
ÃÌ>}Ê >ÌÌiÀiÃÊÊ
Ì
iÊ,iÌiÊÌÀ
Installing Batteries
Installing Batteries
Open the battery compartment
cover on the back side.
Insert two 1.5V AAA size batteries in
correct polarity. Don´t mix old or used
batteries with new ones.
Closed the cover.
*I\\MZa
+W^MZ
`[QbM )))
>
*I\\MZa
+W^MZ
Point the remote towards the remote
control sensor of the wireless TV and
use it within 7 meters.
Put the used batteries into the recyc-
ling bin since it can negatively affect
the environment.
Note:
One loading of batteries will last for
1 year under normal use.
If you do not intend to use the remote
controller for a long period of time,
remove them to avoid damage due to
leakage,
Do not use old and new batteries
together.
The batteries shall not be exposed to
excessive heat such as sunshine, fire or
the like.
Bright sunlight or lighting may cause erratic
remote operation.
ÝÌiÀ>ÊiVÌ
Antenna connection
Antenna input impedance of this unit is 75ohm.
VHF/UHF 75ohm coaxial cable can be connected
to the antenna jack directly, if the antenna cable
is 300ohm parallel flat feeder cable, you need to
use the 300ohm/75ohm converter to connect the
antenna cable to the antenna jack. For details
Please refer to the following drawing.
Antennas with 300 Ω flat twins Leads
Use a 75ohm - 300ohm converter
300ohm coaxial cable
Antenna feeder
ANT IN
Antennas with 75 Ω Round Leads
75ohm coaxial cable
Antenna cable
Summary of Contents for PRO16
Page 1: ......