22
TV Setting Operations
Channel setup
Press MENU button on the TV set or the remote
controller. Then press / button until “Channel”
are activated (such option becomes a protruding
shape). Press OK button to access “Channel”
setup menu, with the TV set display menu as
shown as follows:
1. search
You must switch your TV to the ATV/DTV
source (detail operation please refer to
“Source Setup”).
Then follow steps in the previous page.
1)Auto Tuning
At first press“OK”or “ ” button to start “Auto
Tuning”, then press / button to choose Country
as following:
Press left/right arrow button to select “Start”
and press OK button to search, then searching
interface ginterface will be on the screen as
following: (If you want to exit, press “ / ” button
to select “Cancel”, and press OK button To exit.)
The number of searched channels will be shown
on the screen.
When the searching of ATV channels is over, TV
will start to search DTV channels.
When the whole searching is over, all the
channels will be stored in the channel.
List and there is a message on the screen:
NOTE:
1) If you want to exit the ATV searching,
you can press MENU button, then a
message will be on the screen.
2) The same as ATV searching, you
can press MENU button to exit the DTV
searching, then the message will be on
the screen too.
3) If you want to exit the whole searching,
you can press EXIT button.
2)ATV Manual Tuning
In the ATV source, you can choose “ ATV Manual
Tuning “ to enter “ATV Manual Search” menu as
following:
Storage To: You can press / button to change
channels which are used to store
the searched channels.
System: You can press / button to choose
sound system of ATV signal.
Current CH:You can see the current channel
number and you can press / button to choose
the channel you want to modify.
Summary of Contents for PRO16
Page 1: ......