background image

Remote Control

You can use the remote control up to about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote
control to operate your Set-Top box, VCR, Cable box or DVD player. 

Selecting the Video Signal Source

Before your TV can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e., an
antenna or a cable system).

Press the MENU button. Press the 

or 

button to select “Channel”, then press the
ENTER button.

Press the 

or 

button to select

“Air/CATV”, then press the ENTER button.

If you are connected to an antenna, press
the 

or 

button to select “Air”.

If you connected cable, press the 

or 

button to select the type of cable system:
“STD”, “HRC” or “IRC”.

Press the EXIT button to exit.

Storing Channels in Memory (Automatic Method)

First, select the correct signal source (“Air”, “STD”, “HRC” or “IRC”) as
described before.

Press the MENU button. Press the 

or 

button to select “Channel”, then press the
ENTER button.

Press the 

or 

button to select “Auto

Program”, then press the ENTER button.

Press the ENTER button to start the auto
program.
The TV begins memorizing all of the
available stations.
Press the ENTER button at any time to
interrupt the memorization process.

Press the EXIT button to exit.

Connecting Cable TV and VCR

You can connect different cable systems to your TV, including cable without a cable box, and cable with a cable box that descrambles some or all channels.

Connecting a Cable Converter Box

This connection allows you to watch cable and premium channels. You should keep your TV selected
to “ANT 1 IN” so that you can use the TV features. When viewing premium channels, select “ANT 2
IN” and tune the TV to channel 3 or 4 (whichever channel is vacant in your area), then use the
converter box to change channels. You will need two coaxial cables.

NOTES

• When you use a converter box with your TV, there may be features that you can not program

using the remote control, such as programming your favorite channels and blocking channels.

• The output from “ANT 1 OUT” is available when select “Ant.2” in the “Antenna“ channel menu.

Connecting a Cable Converter Box and a VCR

This connection allows you to watch and record basic and premium cable channels, as well as
watch videotapes. You should keep your TV selected to “ANT 1 IN” so that you can use the TV’s
features. When viewing premium channels or recording with the VCR, select “ANT 2 IN” (whichever
channel is vacant in your area), then use the converter box to change channels.

Caution: If you want to record one channel while watching another channel, a splitter (not included)
must be added between the cable and “ANT 1 IN”. One output of the splitter goes to “ANT 1 OUT”
and the second output is connected to IN on the cable converter box.

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a S-VHS VCR, use the S-Video connections and remove the video cable. Do not connect
the video cable and the S-Video cable to video1 simultaneously.

When you use a converter box with your TV there may be features that you can not program using
the remote control, such as programming your favorite channels and blocking channels.

Connecting to Y, P

B

, P

R

Connect a set of audio cables between the COMPONENT (1 or 2) audio
(L,R) in jacks on the TV and the AUDIO OUT jacks on the DVD player.
To enable Component video viewing, connect a set of video cables
between the COMPONENT (1 or 2) VIDEO (Y, P

B

, P

R

) in jacks on the TV

and VIDEO (Y/P

B

/P

R

or Y/C

B

/C

R

) OUT jacks on the DVD player.

NOTE :

For an explanation of Component video, see your DVD player's
owner's manual.

Connecting to Audio and Video Jacks

Connect a set of audio cables between the Audio in (1 or 2) jacks on the
TV and the AUDIO OUT jacks on the DVD player.
Connect a video cable between the VIDEO IN (1 or 2) jack on the TV and
the VIDEO OUT jack on the DVD player.

Connecting a DVD Player

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

Quick Guide

1. POWER

Turns the TV on and off.

2. S.MODE

Adjust the TV sound by selecting one of the preset

factory settings (or select your personal,

customized sound settings.)

3. P.MODE

Adjust the TV picture by selecting one of the

preset factory settings (or select your personal,

customized picture settings.)

4. +100

Press to select cable channels over 100 on TV.

5. VOL 

+, VOL -

Press to increase or decrease the volume.

6. MUTE

Press to mute the TV sound.

7. FAV.CH (Favorite 

Channel)

Press to switch between your favorite channels.

8. MENU

Displays the main on-screen menu.

9. STILL

Press to stop the action during a particular scene.

Press again to resume normal video.

10. P.SIZE

Press to change the picture size.

11. MODE

Selects a target device to be controlled by the

Samsung remote control (i.e., TV, STB, VCR,

CABLE, or DVD).

12. PRE-CH

Tunes to the previous channel.

13. SOURCE

Press to display all of the available video sources

(i.e., TV, Set-Top box, VCR, DVD, DTV, PC).

14. CH

, CH

Press to change channels.

15. INFO

Press to display information on the TV screen.

16. EXIT

Press to exit the menu.

17.

œ

œ

, ENTER

Press to select highlight up, down, left, or right.

While using the on-screen menus, press the ENTER

to activate (or change) a particular item.

18. MTS (Multichannel Television Stereo)

Press to choose Stereo, Mono or SAP (Separate

Audio Program).

19. SRS

Activates TruSurround.

20. ADD/DEL

Press to add or erase channels in the TV’s

memory. Use the ADD/DEL button to memorize

and erase the fine tuning after fine tuning

channels.

21. SLEEP

Press to select a preset time interval for automatic

shutoff.

22. PIP (Picture In Picture)

Activates PIP.

23. SET

Used during set up of this remote control, so that it

will work compatibly with other devices (Set-Top

box, VCR, Cable box, DVD, etc.)

24. DNIe (Digital Natural Image engine)

Activates DNIe.

25. PIP Controls

SIZE

; Press to select the size of PIP window.

SWAP

; Press to exchange the video signal that is

currently displayed on the main screen with the

signal in the PIP window.

CH

/

; Press to display the available

channels in sequence. (These buttons change

channels in the PIP window only.)

26. VCR/DVD Controls

Controls VCR or DVD functions: Rewind, Stop,

Play/Pause, Fast Forward.

27. RESET

If your remote control is not functioning properly,

take out the batteries and press the reset button

for about 2~3 seconds.  Re-insert the batteries

and try using the remote control again. 

Your New Wide TV (DLP)

Connections

Operation

Channel

Antenna

: Ant.1

Air/CATV

: Air

Auto Program

Add/Delete

Favorite Channels

Name

Fine Tune

▼ 

More

Move

Enter

Return

Channel

Setup

Sound

Picture

Input

Channel

Antenna

: Ant.1

Air/CATV

: Air

Auto Program
Add/Delete
Favorite Channels
Name
Fine Tune

▼ 

More

Move

Enter

Return

Channel

Setup

Sound

Picture

Input

Air

STD

HRC

IRC

Channel

Antenna

: Ant.1

Air/CATV

: Air

Auto Program

Add/Delete

Favorite Channels

Name

Fine Tune

▼ 

More

Move

Enter

Return

Channel

Setup

Sound

Picture

Input

Start

Auto Program

Enter

Return

Stop

Auto Program

Enter

Return

Air  11

From Cable

From

Cable

TV Rear Panel

TV Rear Panel

Second VCR

TV Rear Panel

DVD Player

Incoming Cable or

Antenna

TV Rear Panel

DVD Player

Incoming Cable or

Antenna

BP68-00335A_Atlantis_QG  6/4/04  2:22 PM  Page 1

Reviews: