Setting up the Printer
KODAK PROFESSIONAL Large
Format 3000 Series Inkjet Printers
40
Aligning the Media
1. Check the position of the
left
side of the media to make sure that it is at least
0.25 in. (5 mm) from the edge of the pressure roller.
If the distance between the left side of the
media and the pressure roller is less than
0.25 in. (5 mm) or the left side is not under a
pressure roller, align the right edge again.
IMPORTANT:
The baseline holes are a guideline. You are allowed about 0.25 in.
(5 mm) of play to the left and right of the center of the base line
holes. This play allows you to correctly align the media.
2. Lower the media hold lever, and close the
cover. The head moves automatically and
detects the media size.
The control panel displays the following
message during loading:
MEDIA INITIALIZING
After performing the media loading sequence
(about 30 seconds), the printer displays the
following message:
PLOT OK
