Setting up the Printer
KODAK PROFESSIONAL Large
Format 3000 Series Inkjet Printers
35
Aligning the Media
IMPORTANT:
The baseline holes are a guideline. You are allowed about 0.25 in.
(5 mm) of play to the left and right of the center of the baseline
holes. This play allows you to correctly load the media.
baseline
holes
1. Align the front edge of the media with the
leading edge of the printing plate.
2. Align
the
right
side of the media with the
baseline holes.
3. Check the position of the
left
side of the media to make sure that it is at least
0.25 in. (5 mm) from the edge of the pressure roller.
4. If the distance between the left side of the media and the pressure roller is less than
0.25 in. (5 mm) or the left side is not under a pressure roller, align the right edge
again.
