Kodak 3H0610 Manual Download

Page: 43 / 170

Windows - FastManage Configuration Utilities

3-16

July 1998

A
S

M
A
N
A
G
E

3.4.4.5 Protocols

Enable IP, Enable IPX, Enable NetBIOS -

after installation, Discovery

protocols may be selected and de-selected using this menu.

Note: If you disable all protocols and then close Discovery, Discovery will

not be able to start up again, so you will not be able to select a
protocol using this menu. To recover from this situation, edit the

issnmp.ini

Þle and replace ÒNOÓ with ÒYESÓ in one of the protocol

statements, i.e. ÒIP=NOÓ, ÒIPX=NOÓ, and ÒNETBIOS=NOÓ.

3.4.4.6 IP Parameters

Use DNS:

Use ÒDomain Naming SevicesÓ to reference nodes.

Poll IP Range:

Traverses through the IP address range for that

subnet, discovers each host through SNMP, and displays those that
respond.

Do IP Broadcast:

If this checkbox is selected, perform IP Discovery.

Every

: Re-discovers hosts every

<n>

seconds.

Summary of Contents for 3H0610











































































































































































Search results

Summary of Contents for 3H0610

Reviews:

Related manuals for 3H0610

Brands by name

Popular brands

Kodak 3H0610, Manual

Search results

Summary of Contents for 3H0610

Reviews:

Related manuals for 3H0610

Brands by name

Popular brands