Kodak 3H0610 Manual Download

Page: 127 / 170

Printing

July 1998

11-3

11.3 Changing From PostScript to Raster Printing Modes - Kodak

DCP 9000/9300 Proofers

1. If the Indicator next to the

ON LINE

key is lit, then Press

ON LINE

the display panel when READY appears in the panel to take the
proofer OFF LINE.

2. Press

MENU

and SETUP:EXIT will appear.

3. Press

until SETUP:MODE appears.

4. Press

ENTER

to access the SETUP:MODE submenu.

5. Press

until MODE:POSTSCRIPT or MODE:RASTER appears.

The currently selected version is indicated by an asterisk (*).

6. Press

ENTER

to make your choice.

7. Press

until MODE:EXIT appears.

8. Press

ENTER

9. Press

until SETUP:EXIT appears.

10.Press

ENTER.

If you change the mode, wait for the printer to reinitialize and return to
READY.

ON LINE

TEST

CANCEL/

ENTER

MENU

RESET

”

“

”

“

”

“

”

“

Summary of Contents for 3H0610











































































































































































Search results

Summary of Contents for 3H0610

Reviews:

Related manuals for 3H0610

Brands by name

Popular brands

Kodak 3H0610, Manual

Search results

Summary of Contents for 3H0610

Reviews:

Related manuals for 3H0610

Brands by name

Popular brands