Kodak 3H0610 Manual Download

Page: 104 / 170

Windows NT 4.0 Workstation/Servers

July 1998

8-9

N
D

4
0

5. Enter the name of the print queue.

For example: Server = NT Svr and Share name = KodakQ would
result in \\NTSvr\KodakQ being the name of the queue.

The procedure is complete. Proceed to Section 8.6,

Installing the Kodak

Printer Driver

8.6

Installing the Kodak Printer Driver

Do as follows to install the Kodak printer driver.

1. From the

Add Printer Wizard

window, select

Kodak

from the list of

Manufacturers. Click on

Have Disk.

Note: Printer drivers provided by Microsoft appear in the Add Printer

Wizard window as Kodak printer drivers. These drivers have not
been tested or certiÞed by Kodak. If you are not sure that a Kodak
driver is installed, install the Kodak driver supplied with the printer.

The window below appears.

2. Insert the diskette containing the Kodak printer driver in the disk drive.

Click on

Summary of Contents for 3H0610











































































































































































Search results

Summary of Contents for 3H0610

Reviews:

Related manuals for 3H0610

Brands by name

Popular brands

Kodak 3H0610, Manual

Search results

Summary of Contents for 3H0610

Reviews:

Related manuals for 3H0610

Brands by name

Popular brands