4-12
A-61316 April 2010
Replacing the
exhaust filter
Replace the exhaust filter on the back of the printer when you replace
the toner cartridge.
1. Remove the used exhaust filter and dispose of it according to your
local regulations.
2. Remove the new filter from its box and insert it into place.
Troubleshooting
Misfeed clearing
procedure
Locate the misfeed using the code and perform the misfeed clearing
procedure.
CAUTION: The fusing unit inside the printer becomes very hot
during operation. To avoid a burn, be very careful not
to touch it.
Code
Description
P0
The wrong size paper has been loaded in the paper feeding tray.
• Load the set size paper in the set direction. This code also
appears when two or more sheets of paper are taken up at the
same time.
P1
There is a misfeed near the paper take-up section or more than
one sheet of paper is taken up at the same time.
P2
There is a misfeed near the toner cartridge.
P3
There is a misfeed near the fusing unit.
