Kodak 2400 DV Plus User Manual Download Page 24

Page: 24 / 74

A-61316 April 2010

3-1

3 Using the Scanner

This chapter provides procedures on how to use the

Kodak

2400 DV

Plus Digital Scanner.

Following is an outline of the basic printing procedure. Detailed
procedures on these steps follow in this chapter.

1. Load the film. The procedure for loading film is determined by the

type of Film Carrier (optional) that is being used. Review the
Operator’s Manual that came with your film carrier for more
information.

2. Select and replace the lens.

3. Select the connection mode, either PC or PR.

4. If desired, select zoom, focus or rotation options.

5. Select either negative or positive printing.

6. Select the image density.

7. Enter the number of prints to be made.

8. Select the output format.

9. If necessary, adjust the image processing features.

10. Press

Start

to scan and/or print the displayed image. The scanning

and/or printing of the image is initiated after the Start key is pressed.

Summary of Contents for 2400 DV Plus











































































Search results

Summary of Contents for 2400 DV Plus

Reviews:

Related manuals for 2400 DV Plus

Brands by name

Popular brands

Kodak 2400 DV Plus, User Manual

Search results

Summary of Contents for 2400 DV Plus

Reviews:

Related manuals for 2400 DV Plus

Brands by name

Popular brands