+
-
KNX bus
Ethernet
ATTENTION!
Installation and connection of the device to the mains must only be carried
out by qualified personnel! Be sure to turn off the power before installing or removing the
device! Even when the device is turned off, the output terminals can be live! Do not
connect to the outputs a load that exceeds the recommended values! The design of the
device meets the requirements of electrical safety according to GOST 12.2.007.0-75.
1.3 INSTALLATION AND CONNECTION
INSTALLATION
WIRING DIAGRAMS
Attaching to DIN rail
Removing from DIN rail
page 6
module-electronic.ru