ETS Parameter
Setting
{Factory Default}
Comment
HTTP port
80
8080
{8080}
Select one of the two official system ports.
DHCP
do not use
use
{use}
If DHCP is used, no further IP parameters have to
be set.
Table 4.
IP configuration tab parameter settings, DHCP on
Figure 5.
IP configuration tab parameters, DHCP off
ETS Parameter
Setting
{Factory Default}
Comment
IP address
0-255.0-255.0-255.0-255
{0.0.0.0}
IP byte 1 to 4: manual input
Subnet mask
0-255.0-255.0-255.0-255
{255.255.255.0}
SM byte 1 to 4: manual input
Default gateway
0-255.0-255.0-255.0-255
{0.0.0.0}
DG byte 1 to 4: manual input
DNS server
0-255.0-255.0-255.0-255
{0.0.0.0}
DNS byte 1 to 4: manual input
Table 5.
IP configuration tab parameter settings, DHCP off
page 13
module-electronic.ru
